In the year of 2020, there has been a terrible virus, which is called “the novel coronavirus”. Coronavirus striking us unexpectedly, all businesses have been affected and most have been suggested to close down until further notice.
The government suggested us stay at home and do not go out if not necessary. When people go out, they must wear a mask, even during work time. The city is very quiet and not as bustling as it was before.
In this special occasion, no-contact distribution robot and disinfection robot are just needed.
UV disinfection and sterilization robot kills germs in the environment by decomposing their DNA structures, thus preventing and reducing the spread of viruses, bacteria and other harmful microorganisms.
M2 has the ideal UVC disinfection systems to fill the need of any hospital, long term facility, or any area that is improving infection control procedures. This robot has two working modes: air circulating disinfection and sterilization, and UV disinfection and sterilization, and applies to a variety of complicated scenarios.
Specification
Model | M2 Disinfecting Robot |
Dimension | 500*500*1350 |
Disinfectant Capacity | 1.5L |
Net Weight | 70kg |
Max. Walking Speed | 1m/s |
Max. Climbing Angle | ≤5° |
Network Interface | WiFi/4G/Bluetooth |
Battery Capacity | DC 48V, 15Ah |
Rated Power | 90W |
Standby Current | ≤0.5A |
Battery Life | 8 hours continuous working |
Standby Time | ≥48 hours |
Operating Time | 20000 hours |
Operating Temp. & Humidity | 0-45°C, RH: 5%-85%, no dust |
Working Environment | Indoor environment, flat smooth ground |
Charging Method | Automatic/Manual Charging |
Input Voltage | Charging pile and adaptor input rated voltage 220V/50Hz |
Storage Temp. | -10°C-60°C |